WashTower Washer
Device Profile
Supported features may vary by model and country.
Property
| Resource | Property | Value | ||||
|---|---|---|---|---|---|---|
|
Module Class |
Type |
Name |
Type |
R/W |
Value Name |
Description |
|
runState |
Object |
currentState |
Enum |
R |
POWER_OFF |
Power OFF |
|
R |
INITIAL |
Standby |
||||
|
R |
PAUSE |
Pause |
||||
|
R |
DETECTING |
Detecting load |
||||
|
R |
SOAKING |
Soaking |
||||
|
R |
RUNNING |
Running |
||||
|
R |
RINSING |
Rinsing |
||||
|
R |
SPINNING |
Spinning |
||||
|
R |
END |
Washing completed |
||||
|
R |
RESERVED |
Reserved |
||||
|
R |
FIRMWARE |
Updating firmware |
||||
|
R |
DRYING |
Drying |
||||
|
R |
COOL_DOWN |
Wrinkle Care 1 |
||||
|
R |
RINSE_HOLD |
Pausing after rinsing |
||||
|
R |
REFRESHING |
Wrinkle Care 2 (FRESHCARE) |
||||
|
R |
STEAM_SOFTENING |
Steam Softening |
||||
|
R |
ERROR |
Error |
||||
|
R |
SMART_GRID_RUN |
Running Smart Grid |
||||
|
R |
ADD_DRAIN |
Draining added |
||||
|
R |
DETERGENT_AMOUNT |
Displaying the detergent amount |
||||
|
R |
PREWASH |
Pre-washing |
||||
|
R |
SHOES_MODULE |
Drying shoes |
||||
|
R |
PROOFING |
Proofing |
||||
|
R |
DISPENSING |
Auto-dispensing detergent |
||||
|
R |
SOFTENING |
Checking the amount of softener |
||||
|
R |
CHECKING_TURBIDITY |
Detecting turbidity (when using AUTOWASH course of G+Best model) |
||||
|
R |
CHANGE_CONDITION |
Displays after automatically changing options based on the turbidity detection results |
||||
|
R |
DISPLAY_LOADSIZE |
Displays load detection results |
||||
|
R |
FROZEN_PREVENT_INITIAL |
Anti-freeze mode standby |
||||
|
R |
FROZEN_PREVENT_RUNNING |
Running anti-freeze |
||||
|
R |
FROZEN_PREVENT_PAUSE |
Pausing anti-freeze |
||||
|
R |
SLEEP |
In sleep mode |
||||
|
operation |
Object |
washerOperationMode |
Enum |
W |
START |
Start washing |
|
W |
STOP |
Stop washing |
||||
|
W |
POWER_OFF |
Power OFF |
||||
|
W |
WAKE_UP |
Wake up the device in sleep mode |
||||
|
remoteControlEnable |
Object |
remoteControlEnabled |
Boolean |
R |
TRUE |
Remote Control On |
|
FALSE |
Remote Control Off |
|||||
|
timer |
Object |
remainHour |
Number |
R |
|
Remaining Time (in hours) |
|
remainMinute |
Number |
R |
|
Remaining Time (in minutes) |
||
|
relativeHourToStart |
Range |
RW |
|
Starts after a designated amount of time in hours |
||
|
relativeMinuteToStart |
Number |
R |
Starts after a designated amount of time in minutes |
|||
|
relativeHourToStop |
Range |
RW |
Completed after a designated amount of time in hours |
|||
|
relativeMinuteToStop |
Number |
R |
Completed after a designated amount of time in minutes |
|||
|
totalHour |
Number |
R |
Total washing time (in hours) |
|||
|
totalMinute |
Number |
R |
Total washing time (in minutes) |
|||
|
detergent |
Object |
detergentSetting |
Enum |
Profile |
AUTO |
Automatic Setup Devices |
|
Profile |
NORMAL |
Non-Automatic Setup Devices |
||||
|
location |
Object |
locationName |
Enum |
R |
MAIN |
Main washer |
|
R |
MINI |
Mini washer |
||||
Notification
|
Push Code |
Description |
|---|---|
|
WASHING_IS_COMPLETE |
Washing is completed. |
|
ERROR_DURING_WASHING |
An error occurred while washing. |
Error
|
Value |
Description |
|---|---|
|
WATER_SUPPLY_ERROR |
The error on water supply |
|
WATER_DRAIN_ERROR |
The error on water drainage |
|
OUT_OF_BALANCE_ERROR |
The error on dehydrating |
|
LOCKED_MOTOR_ERROR |
The error on driver motor |
|
CHILD_LOCK_ACTIVE_ERROR |
The error on child lock |
|
TIME_TO_RUN_THE_TUB_CLEAN_CYCLE_ERROR |
The error on washing the cylinder |
|
UNBALANCED_LOAD_ERROR |
The error on unbalanced load |
|
DOOR_OPEN_ERROR |
The error on the door opening |
|
UNABLE_TO_LOCK_ERROR |
The error of unable to lock the door |
|
OVERFILL_ERROR |
The error on overfilling the water |
|
WATER_LEVEL_SENSOR_ERROR |
The error on water level sensor |
|
POWER_FAIL_ERROR |
The error on power |
|
TEMPERATURE_SENSOR_ERROR |
The error on the temperature sensor |
|
TIMEOUT_ERROR |
The timeout error |
|
PART_MALFUNCTION_ERROR |
The error on the part malfunction |
JSON
#Washer
{
"error": [
"OUT_OF_BALANCE_ERROR",
"WATER_LEVEL_SENSOR_ERROR",
"DOOR_LOCK_ERROR",
"OVERFILL_ERROR",
"UNABLE_TO_LOCK_ERROR",
"POWER_FAIL_ERROR",
"TEMPERATURE_SENSOR_ERROR",
"WATER_DRAIN_ERROR",
"DOOR_OPEN_ERROR",
"WATER_SUPPLY_ERROR"
],
"notification": {
"push": [
"WASHING_IS_COMPLETE",
"ERROR_DURING_WASHING"
]
},
"property": [{
"location": {
"locationName": "MAIN"
},
"operation": {
"washerOperationMode": {
"mode": [
"w"
],
"type": "enum",
"value": {
"w": [
"START",
"STOP",
"POWER_OFF",
"WAKE_UP"
]
}
}
},
"remoteControlEnable": {
"remoteControlEnabled": {
"mode": [
"r"
],
"type": "boolean",
"value": {
"r": [
true,
false
]
}
}
},
"runState": {
"currentState": {
"mode": [
"r"
],
"type": "enum",
"value": {
"r": [
"RINSING",
"END",
"REFRESHING",
"COOL_DOWN",
"RINSE_HOLD",
"DETECTING",
"POWER_OFF",
"SLEEP",
"SPINNING",
"ERROR",
"RESERVED",
"PAUSE",
"RUNNING",
"INITIAL",
"STEAM_SOFTENING",
"DRYING"
]
}
}
},
"timer": {
"relativeHourToStop": {
"mode": [
"r",
"w"
],
"type": "range",
"value": {
"r": {
"except": [],
"max": 19,
"min": 3,
"step": 1
},
"w": {
"except": [],
"max": 19,
"min": 3,
"step": 1
}
}
},
"relativeMinuteToStop": {
"mode": [
"r"
],
"type": "range",
"value": {
"r": {
"except": [],
"max": 59,
"min": 0,
"step": 1
}
}
},
"remainHour": {
"mode": [
"r"
],
"type": "range",
"value": {
"r": {
"except": [],
"max": 30,
"min": 0,
"step": 1
}
}
},
"remainMinute": {
"mode": [
"r"
],
"type": "range",
"value": {
"r": {
"except": [],
"max": 59,
"min": 0,
"step": 1
}
}
},
"totalHour": {
"mode": [
"r"
],
"type": "range",
"value": {
"r": {
"except": [],
"max": 30,
"min": 0,
"step": 1
}
}
},
"totalMinute": {
"mode": [
"r"
],
"type": "range",
"value": {
"r": {
"except": [],
"max": 59,
"min": 0,
"step": 1
}
}
}
}
}]
}
Status Inquiry Result
Example
One washing machine (MAIN)
#Washing machine
[
{
"location": {
"locationName": "MAIN"
},
"runState": {
"currentState": "SPINNING"
},
"timer": {
"remainHour": 1,
"remainMinute": 12,
"relativeHourToStart": 4,
"relativeMinuteToStart": 2
},
"remoteControlEnable": {
"remoteControlEnabled": true
}
}
]
Two washing machines (MAIN, MINI)
#Washing machine
[
{
"location": {
"locationName": "MAIN"
},
"runState": {
"currentState": "RUNNING"
},
"timer": {
"remainHour": 2,
"remainMinute": 30,
"relativeHourToStart": 0,
"relativeMinuteToStart": 8
},
"remoteControlEnable": {
"remoteControlEnabled": true
}
},
{
"location": {
"locationName": "MINI"
},
"runState": {
"currentState": "RUNNING"
},
"timer": {
"remainHour": 0,
"remainMinute": 3
},
"remoteControlEnable": {
"remoteControlEnabled": true
}
}
]
Example - In Error State
[{
"error": "WATER_LEVEL_SENSOR_ERROR",
"location": {
"locationName": "MAIN"
},
"remoteControlEnable": {
"remoteControlEnabled": false
},
"runState": {
"currentState": "ERROR"
},
"timer": {
"remainHour": 0,
"remainMinute": 0,
"totalHour": 0,
"totalMinute": 0
}
}]
Control Command
Example
Starting the standard washing course
{ "operation": {"washerOperationMode": "START"}, "location": { "locationName": "MAIN"}}
Stopping the washing course
{ "operation": {"washerOperationMode": "STOP"}, "location": { "locationName": "MAIN"}}
Washer on timer
{
"location": {
"locationName": "MAIN"
},
"timer": {
"relativeHourToStart": 4
}
}
{
"location": {
"locationName": "MAIN"
},
"timer": {
"relativeHourToStop": 6
}
}